Dealing With A Broken Pipe: What You Should Do While You Wait For A Plumber To Arrive

Imagine for a moment that you come home from work one day to find that a pipe has burst in your basement and is quickly dumping water into your home. You pick up the phone and call a plumber only to find out that it will be at least a few hours before anyone is able to respond to your call for help. Do you know what you should do next? If not, you could find yourself dealing with hundreds or even thousands of dollars worth of unnecessary water damage. This is because every minute that you allow to pass without taking action, the water damage that is caused by your broken pipe will continue to spread. Thankfully, following the three simple steps below can help you to minimize the damage to your home while you wait for a plumber to arrive.

Step 1: Stop The Flow Of Water

The most important thing that you can do is to stop anymore water from entering your home. This can be done by turning off the main water supply valve to your home.

If you are unfamiliar with the location of your main shutoff valve, begin by looking on the exterior of your home right next to the main water pipe leading into your home. If you are unable to locate the shutoff valve at this location, it will likely be located next to your water meter near the front edge of your property.

Once you have located your main shutoff valve, you will need to turn the handle clockwise until the water supply has been completely cut off from your home.

Step 2: Remove The Water From Your Home

The longer water is allowed to remain in your home, the more water your furnishings and building supplies will absorb. Consequently, one of the most effective ways to minimize the water damage to your home is to quickly remove as much of the standing water as possible. The fastest and easiest way to do this will typically be with a wet/dry vac that allows you to suck up multiple gallons of water at once.

If you do not have access to a wet/dry vac, you will need to use a bucket or large pot to scoop up the bulk of the water. Once you are able to get the water level to a more manageable level, you will be able to use mops and towels to remove the remaining water.

Step 3: Start Drying Out Your Home

Even if you were able to respond to the problem within seconds, your furnishings and building materials will have absorbed a significant amount of water. This water can cause serious damage if these materials are not dried properly.

In order to start the drying process, place a dehumidifier in the affected area in order to promote evaporation and keep humidity levels to a minimum. Next, make use of fans to keep the air moving and promote the drying process.

When a pipe is broken, be sure to contact a company like Walt's Plumbing right away to get it fixed. This way, you can avoid costly damages and future problems.


Share